Payment & Shipping Terms:
|Size:||1500*180*1000||Material:||304# Stainless Steel|
|Width:||600--900mm||IR Sensor:||12 Pairs|
|MCBF:||5000000||Arm Material:||Plexiglass Or Tempered Glass|
|Conditional:||Indoor And Outdoor||Open Speed:||0.4sec|
12 pairs IR sensors 900mm width disable passing access control speed gate
|Passing speed||40 people/min|
|Conditional||Indoor and Outdoor|
|Arm Material||Plexiglass or Tempered glass|
Strong Control core.
High-quality DC brushless motor is configured and advanced servo control system is carried to truly
Achieve precise control, stable performance and maintenance-free.
Lossless mechanism structure based on German technology is adopted to ensure long lifespan
Memory function of passing requests: When more than 2 passing signals are given at the same time (including the same direction and opposite direction), the system will remember all the passing requests and finish them one by one. The number can be up to 255.
Automatic reset function: The turnstile will open the gate after receiving the valid opening signal when standby. The swing gate will return to the hindered zero position automatically under the following situation:
1) Within the allowed time, pedestrians have been detected in the specified direction passing the passage;
2) Over the allowed time, there is no people has been detected passing in the passage.
Passing mode switching function: The entry and exit can be set independently 【controlled mode】 /【 free mode 】/【 forbidden mode】
Self-recovery function: The swing gates do not return to the hindered zero position because of human intervention. After revoking human intervention, the gate automatically return to the hindered zero position.
Automatic adjustment function: When the turnstiles need to re-adjust because of mechanical wear, the main board can automatically adjust, accurate and convenient.
Passing indication function:
1) Direction indicator: The direction indicator is installed on the top of the housing to indicate the valid passing direction.
2) Passing status indicator: It is installed inside the housing side, indicating whether the swing gates can open after receiving the valid signal.
Compatibility: Equipped with the dry contact signal input interface, RS485/RS232 interface, TCP/IP interface (optional), compatible with all kinds of access controllers.